Save up to 30% - until up to and including 22.05.2022! 
Attention
Not recommended for children under 3 years of age
Use under the direct supervision of adults
The indicated measurements and colours may vary slightly
Angle anchor Wickey PROLock
Article number:
640190
Get the best tips on our wooden products here
Like every natural product, wood also has individual characteristics. Here you can find out more about the wood characteristics of our products.
Impregnation
- Water is pressed into the wood through pressure impregnation
- Due to the impregnation, painting is not necessary
Tip:
The impregnation may cause the wood to be damp. It is therefore advisable to unpack it after arrival and let it dry for at least two days.
Pre-drill the holes before inserting the screws. This minimises the risk of damaging the alloy of the screws.
Salt efflorescence
- Superficial white to brownish spots
- Mixture of existing resin and ingredients of boiler pressure impregnation
- Fades over time due to the weather
Tip: Strongly affected areas can be easily sanded!
Cracks and branches
- Branches, grains and markers belong to the characteristics of the wood
- Dry cracking is permitted according to DIN 4074
Tip: Cracks with ¼ of the length and ¼ of the width are statistically harmless!
Swelling and shrinking
- Volume change due to moisture absorption/drying is typical of the wood
- To ensure accurate assembly, not all wooden parts are pre-drilled due to wood movement
Tip: Unpack your wood directly and let it dry for at least 2 days!
